GN Team Again From OTC with Large Success

Two weeks ago, GN sales team members and GN top management were rear from Houston, USA. That they went to Houston for the annual oil and gas festival, the OVER-THE-COUNTER Oil Show. This OVER THE COUNTER was a success for GN. Most of GN’s equipments throughout stock in Houston storage place were sold out and GN Solids Control’s name had been better spread among the essential oil drilling and oil assistance companies.

After the OTC Acrylic Show, GN staff inside USA branch has to be active for a while for packaging the actual equipments and deliver those to the buyers.
This OVER-THE-COUNTER, GN has two holds, one is in Chinese companies’ area. Even before GN setup the branch with identify of GN Solids America in USA, GN’s company was known to many companies on the globe. Now this brand becomes a growing number of famous.
Of course , this is not due to the fact of the Oil Show, the greater important reason is that GN’s products are of high quality and great performance. What are GN’s main products and which are the best suppliers?
1 . GNLW363CG Decanter Centrifuge. Decanter centrifuge is not only utilised in solids control, but also, extensively used in drilling waste management devices. unless other solids control equipments, decanter centrifuge ,shear pump, shale shaker ,mud mixing system shows much more a company’s producing potential. It could be used for solids control, drilling waste management equipment after the VG dryer or the high-G shaker, as well as plays as dewatering centrifuge for drilling fluids.

installment payments on your GNCD series vertical cuttings dryers. Comparing with decanter centrifuge, it is a new product. It can be designed originally for the oil-based mud drilling cuttings waste materials management. But as some GN clients are using it throughout water based mud in addition, GN now designed the actual 5th generation with brand-new material in order to deal with this particular based mud. Now a lot more than 50 sets of GN vertical cuttings dryers work in many countries in the world and the evaluations are better than OK.
3. GN shale shakers and excessive G shakers. The shakers, solids control shakers as well as high G shakers to get waste management systems are generally important, they are used to different out most of drilling cuttings.
4 GN shaker monitors. GN make high quality connected with shaker screens for the two GN’s own shaker and also other brands’ replacement shaker displays.

GN Series Pumps Used for Solids Control and Waste Management

Besides the main equipments used for solids control and waste management systems and HDD, CBM, Piling drilling projects, like the shale shaker, desander, desilter, mud cleaner, decanter centrifuge and vertical cuttings dryer, GN also produce suitable and reliable auxiliary equipments including mud agitator, mud gun, jet mud mixer and various of pumps.

Below are some popular pumps and their applications for your information:

1. centrifugal pump GNSB Series, which is also called sand pump. It uses centrifugal force to suck the material and feed to the main equipments. In a complete system, it is widely used like the desander cones feeding pump, desilter cones feeding pump and also the mixing pump for the jet mud mixer. In trip tank for a large solids control system, centrifugal pump is also used.

In a mud recycling system for the HDD, CBM, TBM or Piling, in most cases, centrifugal pumps are used as desander or desilter cones feeding pump also, and also mixing pump for the jet mud mixers. Sometimes, per client special request, it could be replaced by a horizontal slurry pump when serving as desander or desilter feeing pump.

2. shearing pump, plays similar role as centrifugal pump, but in some special chemical transportations, it is feeding pump for jet mud mixer also and because of the different design, it could also cut the chemicals during transportation.

3. submersible slurry pump, it serves mainly 2 applications in GN series solids control system and waste management systems, the first one is centrifuge feeding pump for GNLW363 decanter centrifuges, GNLW452 decanter centrifuges and etc. The second one is the feeding pump for a mud recycling system for HDD, CBM, TBM and piling works. Unless the oil and gas drilling rig jobsite, where the drilling mud could flow directly to the shale shaker, in such mentioned projects, the mud for treating mostly comes from the mud pit. A submersible slurry pump can help to suck mud from the mud pit to the system.

4. screw pump or called mono pump. GN is not manufacturing this screw pump, but in order to match suitable screw pump for the centrifuges, GN cooperate with the German brand Netsch. Screw pumps are most suitable solution for feeding the decanter centrifuges.

May you need any of them, welcome to contact us freely.

Drilling Fluids Recycling Equipment on Drilling Site

There are several ways to treat drilling fluids, but drilling fluids recycling is the most popular and cost effective way in the world. Cause drilling fluids may make pollution to earth, so you can‘t disposal them as per wish. It will cost a lot also to make new drilling fluids, so the drilling fluids will be best to save cost and reduce pollution.

Shale shaker normally will fit for first phase cleaning by screen mesh and vibrating motor supplied G force. Depending on different drilling conditions, you can choose different mesh to reach different applications. Desander will be set after shale shaker to separate solids above 50 microns by centrifugal force with a proper pressure supplied by centrifugal pump. Desilter is the third phase cleaning with a same principle with desander.

Decanter centrifuge will be lay after desilter for forth phase cleaning to 2 – 7 microns, the centrifuge bowl and screw will be in a high speed rotating to supply a centrifugal force which will separate solids particles out. There will be different options for decanter centrifuge by different treating capacity, bowl size, bowl speed and control panel type.

Other than the above equipment , there are assistant equipment like mud agitator , mud gun , mixing pump , mixing hopper , mud tank , etc. to make all working together . All these equipment or tank will get different model, size, qty, layout to make a complete drilling fluids recycling system different.

GN Solids Control is one of the most professional manufacturers for solids control in international market, a complete line solids control / drilling fluids recycling solution can be supplied by professional engineer. Please contact GN Solids for help freely.

Related Arciels:

• A New ERA of GN, after OTC 2015
• Main Parts of GN Shale Shaker
• 20ft containerized flocculent units training course
• The 5 steps purify drilling mud
• GN Solids America and GN Solids Control Succeeded in OTC2015

An Intro of ZJ70D mud recycling system

Once we have spoken before, many world customers are visiting GN Solids Control Co for turnkey solutions on gas and oil industries. And GN is supplying increasingly more drilling liquids control system for clients around the globe.

Regarding to ZJ 70D (2000 Hp) system, this mud recycling system has 8 tanks for solids control. Today, let’s provide you with the brief introduction from what we should finish before.

1. #5 Tanks:

Five tanks are really a weighting and premixing tank. Its 2 separated compartments: one compartment is weighting compartment, with the level of 52 m3 and efficient volume 36.4 m3. The first is heavy mud compartment, whose volume is 34m3 and efficient volume is 23.8 m3.

On top of this mud tank, it's outfitted with 3 teams of mud agitator (15kw), 2 teams of mud guns. Around the left finish of the tank, it's mounted with 2 teams of weighting pumps (75kw). And at the base, the tank is bound with 2 sets direct injection hoppers.

2. #6 tank:

This tank has only one compartment, which is often used for delivering mud for centrifugal pumps. Using the effective amount of 60.2 m3, this tank is bound with 3 teams of mud agitator (15kw) and a pair of teams of mud guns.

3. # 7 tank & # 8 tanks:

For # 7 tanks and # 8 tanks, both are storage tanks. Which two tanks are fixed with 3 teams of mud agitator (15kw) and a pair of teams of mud guns.

4. Trip tank：

You will find 1 group of mud agitator (15kw), 1 group of mud guns and a pair of teams of feeding pumps installed on this trip tank. The level of this tank is 20 m3, as the effective volume is 14 m3.