Increase your environmental friendly
drilling efficiency with GN Solids
Control products, one of the most
important equipment is the Solidification / Stabilisation unit. The drill
cuttings solidification unit is advanced and unique, which is quite flexible
comparing the waste
cuttings solidification plants.
Solidi cation – Is an absorption process
where contaminants, typically oils, are taken into the absorbent material in
the same way a sponge takes on water. In general, solidi cation is the addition
of absorbents such as soil, y ash, kiln dust, cement, clays or sawdust to
the
drilling waste management . The solidi ed product will have improved
properties such as strength, compressibility and a reduced permeability.
Stabilisation – Is an adsorption process
whereby contaminents are electrochemically bonded to the stabilising agents.
Contaminants that are stabilised within the matrix are less likely to be
released into the environment. This process is particularly relevant to the
stabilisation of heavy metals and oils that would otherwise be rapidly
available to the environment through leaching.
The adeptness to coalesce or stabilise a
accurate decay beck and the e ectiveness of the analysis is abased on the decay
blazon and analysis reagent factors. Typically, adumbrative samples of the
decay are class activated to actuate the a lot of acceptable conception
above-mentioned to eld implementation. Selection of the conception is commonly
based on key belief such as leachate superior and backbone of the nal product.
Solidi cation and stabilisation generally
requires the use of specialised accessories and actinic reagents. The processes
absorb signi deceit abstracts administration upstream and after of the bond
unit. Some decay streams may accommodate contaminants that can arrest the
solidi cation/stabilisation processes.
For the solidication / stabilisation action
to yield abode it is important to carefully adviser the decay produced at the
rigsite for levels of alkali baptize and oil. This will advice to minimise the
use of reagents and optimise the process, thereby abbreviation costs and the
ecology impact.
Thus, it is with the accomplishment and
ability that Scomi Oiltools has developed over the endure 20 years that allows
us to, accommodate safe, amount e ective and environmentally complete solidi
cation and stabilisation processes.
