GN Solids Control Company has entered into drilling fluids recycle modules for installation on Oil & Gas drilling.
The drilling fluids module we recommend is designed to accept flow capacities up to 1200GPM, degassing capacity of 1200 GPM, desanding unit capacity of 1000 GPM and desilting unit capacity of 1000 GPM, vertical cutting dryer capacity of 30~50 Ton/hour. An auger system is offered to transfer the drilling cuttings from shale shaker to vertical cuttings for further process. Two decanter centrifuges are also mounted on the tank after the mud cleaner units including high speed decanter centrifuge and middle speed decanter centrifuge. Middle speed decanter centrifuge is applied for recovering barite and high speed is utilized for removing the fine solids in the drilling fluids. All associated skids, tanks and pumps required for the system are included in a small space.
Features and Specifications
GN Linear motion GNZS 594 shakers (618 GPM capacities) with Martin or Oli vibration motor
GN fluids divider unit ensures equal flow across every shakers in order to achieve high efficiency
GNZJ594E-2S12N Mud Cleaner
Two of 10” Desander hydrocyclone (1000 GPM capacity) are mounted on the top of GN 4 panel shale shaker
Twelve of 4” Desilter hydrocyclone (1000 GPM capacity) are mounted on the top of GN 4 panel shale shaker
Vacuum fluids GNZCQ270A Degasser (1200 GPM capacity and self-absorption) maximum separating the dangerous gas from drilling fluids
GN 8x6x11 centrifugal feed pumps (75 HP, 1200 RPM motors) transfer the fluids to mud cleaner unit
GNLW453 middle speed decanter centrifuge recoveries the barite to reuse in the active drilling fluids. GNLW363 high speed decanter centrifuge is capable of removing the fine and ultra-fine solids in the drilling fluids
Vertical cuttings dryer is an environmental friendly unit to recovery the drilling cuttings.
GN Solids Control would like to offer the more drilling fluids recycle solution for your project. Please feel free to contact with us.