GN Mud System for 400m depth water well drilling

GN Solids Control can offer different type mud mixing system for different field application, including big drilling mud system for oil gas drilling, compact drilling mud system for horizontal directional drilling and water well drilling, dredge dewatering system for public works sludge treatment etc.

1) GN solids control 200gpm mud system for 100m to 150m depth water well drilling

The small mud system is only 2 phase separation system, including below equipment.

a. one unit double deck shale shaker with desilter cones.  This design is in order to save space.

b. one unit centrifugal pump for feeding the desilter cones

c. one unit mixing hopper

d. one unit centrifugal pump for mixing hopper and transferring out the clean drilling mud for reuse.

This drilling mud system is only 20feet container size and can be put on 20ft trailer for convenient transportation.

2) 500gpm mud system for 500m depth water well drilling, CBM drilling etc.

The 500gpm mud cleaning  system is relatively bigger mud system both in size and treating capacity. This system is 3 phase separation system,  including below parts.

a. one unit GNZS703 shale shaker with 3 panel shaker screen. 500gpm treating capacity

b. one unit GNZJ703E-D1S8N mud cleaner with 3 panel shale shaker & 1 ea desander cone & 8ea desitler cones.  500gpm treating capacity

c. two unit 37kw centrifugal pump for feeding the desander cones and desilter cones. Pump flow rate is 500gpm

d. one unit mixing hopper with one unit centrifugal pump, as mixing unit.

e. one submersible slurry pump for feeding the shale shaker, sucking from the mud pit and feeding the mud cleaning system.

This mud tank system is about 10meter, can be put on 40ft vehicle trailer for easier transportation. The extra space can be used for the slurry pump, Or other small equipment.

3) 1000gpm mud cleaning system for special condition HDD drilling site, high sand content and higher content of fine solids

CPP have bought 4 sets of 1000gpm mud cleaning system from us, the specialized mud cleaning system work in good performance for CPP. Pls contact GN Solids Control if you need more information.

GN minimize mud recycling systems

A, practice description:
1 . The waste material will be transported to the culebrón number 1 (2 sets connected with drilling fluid shale shaker ), by way of serial number 1 processing, running after the mud mud droped into the number 2
Tank one # tank, solid debris through vibrating screen handling discharge can be collected;
2 . not 1 # tank mud mud tank by the folletín number 3 (screw pump) extraction to number a few (converter mud centrifuge)
Running, after liquid into the second seed (2 # tank within mud tank ), solids discharge tank outside;
3. The mud tank in the 2 # tank mud into the melodrama number 5 extraction, selling to the mud circulating system or in the process;
4. Typically the serial number 7 to six inches of overflow port valve, when the mud tank 1 # tank is full, can discharge via serial number 7;
your five. The serial number eight balance for the next line, when you require to balance the mud tank in the 1 # and 2 # tank can open the device into the mud
The mud balance;

Second, the techie parameters:
1 . To to help the temperature conditions: heat 30 ℃ ~ and 40 ℃, humidity intended for 90% or less (+ 20 ℃).
2 . The structure, manufacture, assembly and debugging the strict implementation associated with IS09001 quality system specifications, and in conformity with the appropriate standards of the state;
Simultaneously meet the requirements of train and highway transportation (9 meters in length, width second . 3 meters)
3. Often the system of the whole surface area (in addition to the putting your unit together, electroplating surface) should be to shade or anti-corrosion treatment, anti-corrosion measures should be guaranteed
Certification in system normal utilize cycle (10 years) be well protected.
4. Capacity: ability to filter sieve acuity after thirty m/h. The centrifuge capability 20-30 m after/h.
your five. Treatment effect, will be more as compared to 2 . 3 g/cm3 occurrence mud treatment to the denseness of 1. 6 1 . seven g/cm3
6. GNZS594E instructions HB vibrating screen: a couple of sets
7. GNLW453CD : VFDS frequency decanter centrifuge : 1
main. GNJBQ055D mud agitator : 1
9. GNG30A - 075 screw pump: 1 motor power: several. 5 kw capacity: following 30 m/h
10. Typically the mud tank: 1

Happy Marriage with regard to GN Solids Control And also Akros

As the leading solids control manufacturer and drilling waste management provider, GN Solids Control just fixed a win-win cooperation deal with one famous company from Russia which is Akros LLC. This will definitely be a cheerful and exciting marriage concerning strong companies.
In the future, GN Solids Control and Akros will work as a close group and strategic partner to create the Russia market jointly. With the fully support through each other, GN Solids Control can provide the most cost-effective solids control equipments and cuttings management systems for Akros, and Akros will have the best option equipments to develop Russia market place with the current channels.
GN Solids Control is the leading solids control provider, most of GN equipments are exported to 60 countries. Now GN Solids Control has 1 American branch company discovers in Houston, TX and another Moscow office. With the synergy agreement with Akros, GN Solids Control will be able to give our equipments with the best right after sales service.

GN Solids Control has provided over some sets of decanter centrifuges and cuttings dryers for you to Baker Hughes in 2014, and they are very satisfied with the functional performance. Some other drilling online businesses are also showed great likes and dislikes to use GN products. Later on, clients in Russia are able to have GN solids control and drilling waste management equipments from our mate across Russia.
GN Solids Control always opens go over on the long time win-win assistance with global clients. In fact, now GN Solids America LLC is looking for distributors throughout America, Canada and Paraguay for selling shaker displays. Welcome to connect with us intended for become a long time partner.
GN Solids America LLC possesses a warehouse in Houston which will keep thousands of shaker screens inside stock, some other equipments will also be widely stocked such as shale shakers, mud cleaners, decanter centrifuges and cuttings electric drying machine etc .

GN Baby Centrifuge Delivered to North America

GN decanter centrifuges are of your big family including the significant bowl centrifuge, middle dimension decanter centrifuge and child centrifuge with a small dimension. Divided by their gears, the centrifuges could be gathered into high speed decanter centrifuge, middle speed decanter centrifuge.
Among all the GN decanter centrifuges, the most popular size is GNLW363CG-VFD, which is a middle size decanter centrifuge with a high speed. It really is mostly for the oil and gas market. But when talking about mining market, the most popular model is GNLW223D, which is of only on the lookout for inch bowl diameter along with speed could reach 4500 RPM, it has been used for mining or prospecting industry for many years among GN clients. Recently, GN solids control just simply delivered this model to help North America, for stone drilling projects.
Following tend to be main parameters of GNLW223D decanter centrifuge:
Bowl period: 670 mm, equal to twenty six inch
Bowl diameter: 208 mm, equal to 9 half inch
Max capacity: 9 cbm per hour, 40 GPM determined by water treatment
Max jar speed: 5000 RPM
Standard bowl speed: 3800/4500RPM
Gear-box Torque: 500
Main engine power: 11kw

Features of GNLW223D decanter centrifuge:
1 . It can be economic and effective employed for the low capacity requests from the mining industry, and the large rotating speed enables the actual decanter centrifuge GNLW223 being suitable for extra fine dust separation.
2 . The dish solids discharge ports are generally protected by tungsten carbide alloy and the bowl is produced by centrifugal casting using Stainless steel SS304.
3. GN use genuine NSK or even FAG bearings for the very good performance of this decanter centrifuge, and the bowl’s weight had been mostly carried by the more strict belt during long distance method of travel in order to protect the bearings.

Besides the baby centrifuge utilized for mining industries, GN in addition have GNLW363 decanter centrifuge typically for oil and gas drilling, GNLW453 and GNLW553 as large bowl centrifuges and midsection speed GNLW452. Welcome to call GN for choosing the suitable product such as shale shaker ,mud cleaner, shear pump. etc.

The brand new Tandem shale shaker from GN Solids Control

GN Solids Control is often a world famous manufacturer for sturdy control equipment and drilling waste management system. Since its initial establishment in 2007 with China, it’s grown rapidly from a small local company for you to great international company. Since 2014, GN Solids Control made a further step towards the globalization, establishing its a couple overseas subsidiaries in PEOPLE and Russia. This forced GN closer to the global market place and make more and more customers recognize GN Solids Control. The actual founder and all its staff strongly believe that quality may be the life of an enterprise. Thus in the very beginning, we attention more about the quality and safe practices than anything else and experimented with our every best to assist reducing the cost for customers. Thus in the industry, many customers highly regarded GN’s product as “good value for money”. GN’s products now has been accredited by API, CE, TP TC and so on.

GN’s manufacturer product line covers shale shaker, mud cleaner, decanter centrifuge, cutting dryer, desander, desilter, centrifugal pump, agitator, vacuum degasser, screw pump, shear pump and so on. GN can be your just one stop shop in the sturdy control area. Among all these products, there is one product that might be call the core a single, that is shale shaker. You will find mainly two separation procedure in the whole solid control practice, the shaker screen along with the centrifuge. When the mud in addition to slurry coming out from the properly, its first coarse parting equipment is shale shaker. Typically the drilling companies can buy the shale shakers throughout pair, like 2, four, or 6. They will have one main in use and the other regarding back up just in case one is lower and the other can still do the job and don’t affect the drilling process. The tandem shale shakes is like the mixture of two shale shakers fastened to one skid. This could be widely used for the large drilling rigs with much higher flowing price of mud. And it has benefits in terms of transportation, processing functionality and cost. And this brand new equipment has a good qualifications, some middle east clients have bought it and officially used on the oilfield, and GN received positive feedback.
Below try our best to assist your business to reach your goals. Welcome to visit www.gnsolidsamerica.com and you should send your inquiries for you to USA@gnsolidscontrol. com 

Newly Updated GNGH-15A Drilling Cuttings Solidification Unit Ready for Delivery

Since early last year GN firstly designed the drilling cuttings solidification unit, one year has passed and GNGH Series drilling cuttings solidification unit has been developed for the 3^rd design based on the clients’ request and the end user’s valuable feedbacks and tips. Now comparing with the 1^st design, this new set of GNGH-15A Solidification unit has a doubled treating capacity and more human oriented modifications.

GN Solids Control is the top solution provider of oil and gas drilling solids control and waste management solutions, providing zero discharge solutions as a closed loop including the solids control, drilling waste management for both OBM and WBM and drilling fluids waste management solutions.

Working Procedure of GNGH-15A Solidification Unit:

The GNGH solidification unit is designed for final treatment of the drilling cuttings discharged from the drilling waste management system, in fact, the solidification unit itself belongs to the waste management system too. Although the cuttings from the High-G dryer GNZS594HGE-LD, GNCD930D vertical cuttings dryer or the GNLW363CG-VFD Decanter centrifuge are already dry, they are still active. By adding and mixing the absorber and some other material like cement with the drilling cuttings, the active components could become inactive and are suitable for being discharged or buried locally.

Besides being used for drilling cuttings, some clients are using GNGH solidification unit for mud tank cleaning work and by changing the input ratio of cement, absorber and slurry, it could reach a good result.

Features of GNGH-15A Solidification Unit:

GNGH-15A Solidification unit has 3 VFD controls, respectively for drilling cuttings feeding, and for the 2 absorbers’ feedings, it enables the operators to adjust the adding ratio easily and quickly. The 2 hoppers are double sized comparing with previous model and there’s a platform for the workers to add absorber easily. The 2 absorber hoppers could be used at same time or separately per jobsite condition.

For more information, welcome to contact GN directly.