The purpose and the function of decanter centrifuge is
to separate liquid our from solid and/or oil.
Some slurry which might contain materials that might cause the corrosion
via contact with metal. In the long-run
of time, it will affects the work ability by decrease the performance that lead less operation time. When corrosion start to appear it and deal
with timely matter, it can solve the problem without cause much of operation
delay.
By collective feedback on the operation field,
corrosion can be spot-alike and evenly -formed.
The spot-alike or random pattern-like corrosion only happened on random
area. The evenly-formed corrosion is
more serious issue that might leave the decanter centrifuge out of commission
pre-maturely. Random and spot-alike
corrosion often happened due to the defects on the surface of metal. The more serious and destructive elements
that contain in the slurry flow into the decanter
centrifuge and without after-work clean-up, it will slowly created the hole
on the metal. If the decanter centrifuge
is not for conservation, the corrosion action will become more and more
serious.
Corrosive wear is a relatively common -happened corrosion.
This kind of corrosion is not serious spot-alike corrosion, but in the centrifuge maintenance
work, it needs to pay attention to. This
wear corrosion is due to friction parts in the work. When maintenance, the
bearing can give parts contact daub lubricating oil, help to reduce friction,
regularly will more serious wear parts are replaced, which can effectively
prevent the corrosion wear.
GN Solids America LLC has a
large warehouse get to 30, 000 sq. feet. GN
Solids America helps to keep many decanter centrifuges are available in
Houston. GN Solids America is providing rental services for these centrifuges
and the some other solids control
and drilling
waste management systems. Different kinds are optional from varying speed
to fix speed.
没有评论:
发表评论