GN 500 GPM Series Mud System for HDD or Other Trenchless Drilling

Hebei GN Solids Control Co., Ltd is actually leading manufacturer in solids control and mud recycling. Besides as the top one out of solids control field intended for oil and gas drilling, Hebei GN Solids Control Co., Limited is also the top one in mud cleaning system and recycling system for Bored Piling, Side to side Directional Drilling, Tunneling etc. Take GN 500 gpm mud system as an example, GN has 4 standard designs with different equipment for different forms of drilling activities.
GNMS-500D fiscal mud cleaning system, also referred to as the desander unit can be used to clean drilling slurry regarding bored piling. It is a two phase treatment plant using a desander mini cleaner attached with a mud tank which is split up into two compartments: shaker inner compartment and desander compartment. Usually no mud mixing system is needed. The slurry popping out from bore piles will likely be collected in a mud abyss from which a submersible slurry pump will deliver the slurry to smoothly and stably feed GN 2 period mud treating cleaner by using a buffer box. The slurry will flow across the little cleaner’s bottom deck predetermined with 25 mesh screen leading the liquids blended with fine solids to through the screen openings while rough solids to stay on the screen and move forward until going out. The liquids are going to be collected at shaker inner compartment and pumped to the desander cyclone for the second phase treatment with particles around 40 microns being segregated. There will be top deck screen to dry the liquids as being the dewatering screen. After that, the actual slurry is cleaner in addition to being able to be reused. We have now already delivered many value packs to many countries. Around ten sets are now operating in Myanmar bore piling site.