Drill cuttings solidification unit unit for drilling waste management

As more and more governments issued increasingly more strict regulations on the envornment protection, drilling waste management equipment becomes more and more required at drilling rig website, especially at oil and gas drilling rig site. As the drilling fluids contents various type of chemicals, if discharged straight. it will have very bad air pollution to the environment.
GN Solids Control latest design drilling waste management equipment drill down cuttings solidification unit tend to be welcomed at jobsite.
1) The drill cuttings renforcement unit can be used to treat drilling cuttings discharged from the higher G drying shaker. Once the cuttings from solids control shaker, desander, desilter handled by high G drying shale shaker, the fluids should go to drying shaker capture tank for further treatment, the actual solids from high Gary the gadget guy drying shaker can be treated through drill cuttings solidification device.
2) The drill cuttings solidification unit can be used to deal with drilling cuttings discharged through decanter centrifuge. The fluid phase will be covered by additional treatment, like dewatering device. while the solids phase can usually be treated by drill cuttings renforcement unit.

3) The solids discharged from vertical cuttings dryer can be further handled by drill cuttings renforcement unit. It can reduce the drinking water content in the waste.
Many consumers may wonder, what is the drinking water content after the drillings handled by drill cuttings renforcement unit? It is not easy to see the particular water content is. Currently flexiable. It is controlled by the providers. If you want to make the cuttings dryer, you add more chemical substances, if you do not need very dryer, you can reduce the quality associated with chemical.
Features of GN most recent design drill cuttings renforcement unit
1) Small presence with high efficiency of GN latest design drill cuttings solidification unit.
2) Instantly control of GN most recent design drill cuttings renforcement unit.
3) All the mess conveyers of GN most recent design drill cuttings renforcement unit are variable pace control.

How to design VFD Control Panel for Decanter Centrifuge

The drilling mud decanter centrifuge driven by VFD will give many benefits to the clients. The adjustable bowl speed and differential speed allows the operators to set the right G force and solids pushing speed according to the drilling mud conditions.

To design the VFD Control Panel, the contractor needs the power supply specifications. Normally it is 460V/60HZ for USA standard or 380V/50HZ for Europe and China standard. Than the pulley size of the motor and bowl side will decide the bowl driving speed at different frequency. After confirming the bowl speed formula, the contractor needs the formula for calculation of the differential speed. For GN Decanter centrifuge, the Sun-Wheel gear box ration is 57:1. So the differential speed will be the bowl speed minus the gearbox input speed and divided by 57.

For the VFD Control panel, there is different explosion proof standard. In China, it is CN Explosion proof which is close to IEC Ex standard. In Europe, it is ATEX Explosion proof. And in North America, the explosion proof standard is UL for USA, and CSA for Canada.

GN Pressurized VFD Decanter Centrifuge control panel is specially design for Zone 1 or Zone 2 standard with ABB VFD and stainless steel cabinet. The PLC smart control allows the user to operate the drilling mud decanter centrifuge by HMI screen.

GN VFD decanter centrifuge has been exported to over 30 countries and regions, GN Solids Control VFD decanter centrifuge is available in different sizes including: GNLW223C-VFD (9inch) bowl, GNLW363C-VFD(14inch bowl), GNLW453C-VFD (18inch bowl), and the big bowl big volume centrifuge with 22inch bowl and model is GNLW553C-VFD.

To support the worldwide operators, GN Solid Control keep expanding our branches, now , GN service and support are available from Beijing, China, Houston, USA, and Russia. Some other areas are covered by GN local partners who are the professional solids control service companies. Welcome to visit us to know more info about our equipment such as shale shaker, Mud Gas Separator, mud agitator, desander, shaker screen,and drilling mud system from our sales team 

Small Decanter Centrifuge Brought GN a New Broad Market

Within GN’s centrifuge production collection, there is a model GNLW223 also is called Mini decanter centrifuge with a bowl diameter associated with 9 inch and twenty six inch long. This small centrifuge is mostly used in gemstone core drilling and some some other small drilling projects. Really, it is a very casual chance for GN to start the production of this mini decanter centrifuge. However , it is unexpected this model brought GN an extensive market in a new business.
GN Solids Control started nearly 10 years ago like a manufacturer of drilling liquids recycling equipment and system. Most of GN’s equipments are utilized in oil and gas drilling business. At that time, most China created decanter centrifuges used in drilling mud system are dish diameter of 18 " with a speed around 2150 RPM. This type centrifuge is a perfect model for barite recuperation.

While at the same time, the imported centrifuges used in China oilfield offers diameter of 14 " with a speed up to over compared to 3000 rpm which could take away the find solids down to five microns from the drilling liquids. No doubt, most of GN’s réflexion are focused on the centrifuge used in oilfield.
One day, GN received an inquiry associated with decanter centrifuge used for gemstone drilling solids removal. That period, GN was much unacquainted to this industry. Look back again, we can definitely say that all of us made a great and correct choice that time. Based the actual technology of manufacturing the centrifuge used in oilfield, GN created the first 9 inch centrifuge for this client coming from a primary drilling company. Luckily, this particular unit pasted the test as well as won GN good suggestions from client
Before the production of this unit, GN actually didn’t know what is gemstone core drilling. Nowadays, you will find already 16 units GN’s mini decanter centrifuge roaming Canada, 3 units in the us and 2 units gear on solids removal device working in Chile. More and more customers in this industry come to GN and show their interests to create business with us on this small decanter centrifuge. This small centrifuge has already been one glowing point in GN full creation line, and its onsite overall performance is proved. The chances are usually there, and are you prepared to grab it?

4 panels shaker made from GN Solids America LLC

GN Solids America LLC is the sale division from GN Solids Control Co., Ltd located in the capitol of the oil industry of North America, Houston, Texas.  Its set up is for the demanding for consult, sale and service of our machinery from both North and South America region.  GN Solids America LLC’s solids control machines are all API certified and meet the industry standard and excess customer's expectation.  GN Solids America LLC's core machine is model GNZS594E-HB 4 panel shale shaker.

In solids control filtering steps,  the 4 panel shale shaker at as the first stage machinery process that filter  large solids cutting in the mud come through the over flow line. Partials larger than 175 microns will be separated. GN Solids America's 4 panel shale shaker GNZS594E-HB is considerable choice compare with M I Swaco Mongoose Pro Shaker.  GNZS594E-HB has large treating capacity of 616 GPM. The buffer box adopts back set makes the height as low as possible to meet the different overflow lines height. This shaker is a 4 panel single deck shale shaker similar with M I Swaco Pro Shaker. The shale shaker screens adopt composite material for extended life usage. The screens are interchangeable with M I Swaco Mongoose screens. Clients who use M I Swaco Pro Shaker who wish to maintain low and fixed operation cost, GNZS594E-HB shale shaker itself and the screens will perform outstanding first stage of solids control process.  The screens adopt block tightening system for easy and fast change screen. Furthermore, the shale shaker deck adopts electrical adjustment and mechanical adjustment is for back up. The vibrating motors GN Solids America LLC pair with two Martins 2.5 HP motor the control box is met IEC EX, ATEX AND UL explosion proof and certified.

Any question, pls contact with GN solids control in Beijing, China or GN solids America in Houston, USA, GN Solids Control Co., Ltd is leading manufacturer for drilling mud solids control & drilling waste management equipment we have the main mud handling equipments in stock for immediate shipment. 

GN Solid Control, Reliable Company for China Oil Leaders

Comparing with many other solids control manufacturers in The far east, GN Solids Control can be a young company with simply several years’ history, but nevertheless, GN Solids Control possesses earned the good reputation in the business and occupied more than a half the share in solids control exporting from China. Now, the particular 3 biggest Oil new york giants in China, are shopping for from GN Solids Control and giving good reactions. Why?
1 . GN Solids Control is the first API Certified Solids Control maker throughout China, who also got qualified by HSE, DNV VOTRE, ISO and many other certificates. Throughout oil and gas industry, the API is a gate pass into the international market. Like DNV CE, is a must to The european countries, which is regarded to be the most difficult and strict industry in the world.

2 . GN Solids Control never ceases to create the technology and designs. GN always updates its machines per customer feedbacks, and the ones feedback tips are very crucial that you the performance of gadgets, like the decanter centrifuge, GNLW363 Decanter centrifuge now is featuring its 3rd generation edition and also the fourth edition is underneath design. Besides the decanter centrifuge, GN also updates their shale shaker, vertical cuttings dryer and shale shaker screens each year to find the better performance.
3. GN is usually strict and responsible for right after sale service and replacement components. In GN warehouses much more than one place in the globe, GN has stock to get spare parts and equipments including Vacuum Degasser, mud agitator, Mud Gas Separator, Shear Pump,drilling waste management equipment.etc. for quick reaction to clients’ requests. And GN engineer and sales team an easy to reply the soon after sale problems and made it easier for clients solve problems.
Individuals advantages help GN Solids Control earn the have confidence in and eyeballs of customers including the China Oil leaders SINOPEC, CNPC, COSL, nicely world famous companies including Scomi Oiltools, RAY, Baker Gaines, and etc .

The purpose of the jet mud mixer

Chinese leading solids control machinery manufacture GN Solids America LLC,   strategic located outside of Beijing for fast shipping around the world, we manufacture full line of solids control machinery and jet mud mixer is one of the products we manufacture our self and offer to various type of drilling project. GNSL series jet mud mixer is the machinery to prepare and increase the drilling fluids weight by adding and mixing  betonies, change the fluid density, change the mud density, viscosity, and dehydration. The effect is more prominent matching with Shear Pump. GNSL jet mud mixer is a unit used together with the drilling mud system for petroleum drilling and horizontal directional drilling (HDD). 

Jet mud mixer's purpose is to increase and the configuration of the drilling fluid machinery, the main function of the jet mud mixer is to change the drilling fluid density, viscosity and water loss.

The equipment with more obvious effect with combination of the shear pump because the betonies powder, chemical treatment agent, barite is equal to the water into the drilling fluid formulated with particular spec or add some additives in drilling fluid has to change its properties.

Jet mud mixer has long proven record of usage in solids control operation.  Drilling mud will change its character by overly use and clean and it needs device like Jet mud mixer to restore the ideal mud condition by adding chemicals and additives to the mud and keep the ideal mud condition.

Jet mud mixer and oil drilling mud system supporting the use of the equipment, the utility model has the advantages of safety and reliability, convenient movement and transportation.  Jet mud mixer has a pump can also be multiple-use and one jet mixing hopper (or multiple) with a pipe valve connection installed on a base composition.

Welcome you contact GN group freely for solution.GN Solids Control sell a series of solids control equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaning system , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client . 

Scalping shaker for drilling mud

GN solids control has 2 models of double deck shale shaker with scaping shaker deck and main shaker deck, but the working principal is different, and the applications are different.

1)      GNZS706E-HB, it is mainly used for oil & gas drilling mud cleaning system, with 2 screen layers to increase the treating capacity and make the separated solids more drier, and larger screen area to treat the drilling fluids better

The working principal of the GNZS706E-HB double deck shale shaker is similar with the single deck shale shaker, the drilling fluids are feeding through the buffer box and flow to the scalping shaker deck which is installed course mesh screen to separate big solids/cuttings, the purpose is to pre-treating the drilling fluids and extend the working life of the main shaker screen. Then the big solids will be discharged out and the fluids drop to the bottom shaker screen ( main shaker screen) with fine mesh size for better cleaning of drilling fluids. The scalping screen area is 21.8 ft2, and the main shaker screen area is 28.25 ft2, with total screen area 50ft2.

2)      GNZS705E Double deck shale shaker is mainly used for construction industry for pilings and crossing work as desander unit, it usually works together with desander cone and desilter cone. The compact design of desanding unit has been widely used for the construction works in Asia and middle east countries.

The working principal is that the bottom shaker working as scaping deck which is to separate big cuttings and the fluids dropped into the mud tank, and the centrifugal pump will transfer the mud from the the mud tank to the hydrocyclones for treatment, the top shaker screens are for drying the separated solids and recovery more clean fluids.

Welcome to contact GN solids control for more details about scalping double deck shale shaker.