High speed decanter centrifuge for building site chemical removal

A set of decanter centrifuge liquid removal centrifuge system have been started to running in a ecu jobsite. The decanter centrifuge system be used at a building construction website for liquid separation, to get rid of the stone, grit, mud and water.

It is the very first time that the clients use the system to remove stone, grit, mud and water. They are not informed about the separation equipment. Once they start to inquire, they merely inquired a high speed decanter centrifuge model GNLW363CG. Create sure the clients pick the best machine for their projects, GN Solids Control sales people have got many communications with the consumers to know well their purposes and their job site issue. And in order to give a better comprehension of different separation machine, GN Solids Control invite the clients to have a visit of GN center in China. Then you can check and equipment without any help, GN engineers can reveal 
applications of different separation products, and then they can have a one on one taking with GN workforce.
GN solids control provides 2 main suggestions into the clients:
1) Firstly, the job are not done with only a decanter centrifuge. As there should be big debris in the liquid mixture, including stone, mud and determination. The big and hard solids will wear out the centrifuge to put it briefly time. It is better to be with some sort of shale shaker separation appliance for pre-separation.

2) Secondly, decanter centrifuge is an expensive separating machine. And the treating potential is small compared with some other separation machine. For preserving cost, they can choose desilter separation as a replacement.
But the consumers insist on decanter centrifuge, consequently finally, they are agreed using a double deck linear action shale for preparation along with fine solids separation. After which a decanter centrifuge to take out the ultra fine solids. The client is happy with often the proposal, and want GN offer a turnkey solution. In such a case, GN offers a decanter mud mixing system with shale shaker, decanter centrifuge, shear pumps , lights, and control panels. It is a turn-key remedy for the clients.

GN Dewatering unit

Gn solid control flocculation and dewatering system, mainly composed of: a set of 2000 l/hourly dosing flocculation system, a drilling fluid centrifuge dehydration, two sets of dry sieve, pumps and so on, is for the drilling mud system in the mud does not be born do better.

Equipment types, technical parameters:
This system can be preparation and adding the two kinds of Polymer drug at the same time, one set of LR - 2000 - s automatic powder preparation of flocculant and dosing device, is used to automatically powder mixture 0.05% - 0.5% of the Polymer solution, and through the two dosing pump for added to the PAM adding medicament.Another set of liquid flocculating agent preparation and dosing device the newly-modified LSY - 2000 l, through solution mixture stirring device, can put the liquid or solid Polymer diluted or diluted, not by two dosing pumps dosing PAC adding medicament.

System composition and the parameters are as follows:

1, PAM automatic preparation system and working principle of the description:
Operators in the process of automatic dispensing, add the potion to the ethephon preparation with the container, after starting system, reagent are mixed with water after the first into the mixing soluble medicine cabinet, and through the mud agitator here fully stirring and mixing;After dissolving medicine cabinet full of own to push flow to cure medicine cabinet, and here again, stirring and mixing;After curing soluble medicine with and push themselves to soluble medicine storage box.When configured solution can be through the dosing pump into the dosing point.

2, PAM powder preparation and how it works:
PAM powder preparation device main body of SUS304 stainless steel materials.The device is divided into three, namely, preparation, ripening and storage of three parts, and its size meet the flocculant curing time.The grid connection should make not curing liquid does not enter the batching.Each case has a vent pipe and control valves.
In the installation of electric mud agitator, shaft and mixing section for SS304 stainless steel material,

In the preparation of the upper installation 1 powder feeding machine, the equipment including accurately match the necessary parts, such as the feed hopper, batching spiral, mixer, etc.
Into the hopper for stainless steel materials, volume of 60 l
Cast with screw pump with speed regulating device, through the control of motor speed will change the dosing quantity of medicine.The discharge pipe is equipped with heating device, to prevent agents to form a smooth dough.Primary wet mixer used in dry powder medicament, and precise dosage to the preparation of lattice.
In the batching installed in the liquid level control device, ensure the batching at the lowest and highest level, automatically switches on the inlet pipe valve, to ensure the continuity of flocculation solution.
Water supply part of modulation device, including the display and adjust running water flow meter, maintain a constant pressure regulator valve, water stop powder additive and alarm of pressure sensor, pipes, pipe fittings and other materials are corrosion resistant.

3, flocculant preparation device and characteristics of the equipment:

Three slot one (mud tank, water tank, storage tank) continuous pickling, maintenance simple and easy operation, low labor costs;
In accordance with the actual demand can be used instead of double groove, make it more economic and reasonable;
The machine is in proportion to allocate function, can arbitrarily adjust the pickling solution concentration in accordance with the actual demand;
This tester pickling concentration and medium, can reduce improper for artificial blending "phenomenon, make or pump pipeline jam, increase unnecessary maintenance costs and powder expenses;
Medicine, liquid mixer fusion effect reached 100%, innovative features;
The machine design and unique standby time can be automatically intermittent pauses cross mixing function, make the pickling solution convergence uniform effect, always in the best use of state;
When powder feeding trough to low stock, sensing detection instrument lights warning and dosing pump parking auxiliary function, for the machine as a whole handling more perfect.

GN Solids Mud System for Oman

Oman is rich with acrylic resources. Lots of client by Oman buy shaker window screens, centrifuges, shakers, mud agitators from us. And in 2014 we successfully sell just one complete set mud system to Oman, the client purchase rig from company as well as the rig company package typically the mud mixing system. Meanwhile, your customer appoint our brand to complement the rig company, as a result of GN Solids Control very good reputation at Oman as well as Middle East market.

The particular mud system is equipped with down below items, including:
1) three sets shale shakers, typically the shaker is 4 panel shakers with replacement screen for Mongoose screen. The dimensions and mounting type is likewise same. The shaker has been longer deck to get better functioning performance and lower repair time.
2) 1 arranged mud cleaner with only two ea desander cyclones and also 12ea desilter cyclones to eliminate the solids particles in several size range. The drilling mud is feeding typically the cyclones by centrifugal sends, sucking from the shaker tank and feeding for the cones. This is compact design model with shaker, desander in addition to deilter.

3) 2 value packs decanter centrifuges. One fixed high speed centrifuge, 14inch jar decanter centrifuge, to remove typically the fine solids 2 to five microns. This centrifuge is employed to lower down the mud weight; one set center speed centrifuge, 18inch serving centrifuge to recovery the particular barite particles for recycle.

4) Several sets connected with mud agitators, mud pistols, centrifugal pumps, mud hopper to support the mud tank solids control systems.

Except Oman, there are also lots of significant buyers from other countries in Midsection East.
In year regarding 2014, we export 1000pcs shaker screens to Iran
In year of 2013, we export half thousand dollars drilling waste management gear to Kuwait, end user is actually KOC.
In past three years, we export over 2 million dollars centrifuges with mixes with vertical cuttings dryer to Iran market.
Throughout past years, we move over 50 sets centrifuges to Africa market to guide drilling companies and mud service companies. If you need virtually any solids control equipment, could you contact us freely.

GN Full Series Decanter Centrifuge for Different Applications

Decanter centrifuge is main equipment in GN’s production line. Based on the most popular model 14 inch decanter centrifuge used in oil and gas solids control system, GN developed several models decanter centrifuge that could be used for different applications.

GN’s 9 inch decanter centrifuge model of GNLW223 is bowl diameter of 9 inch and the designed capacity is 6 cubic meters. With a high working speed up to 3800rpm, this model is always used for fine solids removal. As it has small capacity, it is often used in diamond core drilling for geology research and some other mining projects.

GN’s 14 inch centrifuge is widely used in solids control system and waste waste management system. GN uses material of SS2205 as the bowl material for a better dynamic balance. The protection of screw propeller is using bolted tungsten carbide tiles thickness of 4mm for longer lifetime. This model is both fixed speed and VFD model for customer’s option. Low speed used in traditional solids control for barite recovery and high speed model used for ultra fine solids separation and waste cutting management. 

GN’s 18 inch decanter centrifuge is mainly in Mud Cleaning System system for barite recovery, it has a relative low speed of 2000rpm that is the best speed for this job. GN has two configurations for this 18 inch centrifuge with different material, speed and driving method. Economic type is especially for the customers who want to save on the equipment cost.

GN’s 22 inch decanter centrifuge has designed normal capacity of 90 cubic meters, which is an ideal choice for large flow rate project. One of GN solids control ’s 22 inch centrifuge unit ever been used in dewatering unit for flocculated fine solids separation. The long bowl can provide a long time for separation for a better expected result.

GN’s decanter centrifuges are always assembled with other equipment like shale shaker units or cuttings dryer unit to become a modular system for multi-function application. Any interests on GN’s centrifuge unit, feel free to contact with us.

GN Solids Control equipment for drilling company

GN Solids Control is leading manufacturer and supplier for solids control equipment and drilling waste management equipment. As the down market and lower oil price push some Big drilling company to consider about China product to save production cost, and GN will be your best choice in China to supply solids control equipment.  Recently, we have lots of drilling company and international oil service company to visit GN facility for the MOU of supply solids control equipment.

1) Why choose GN ?

GN is the 1^st API certified China solids control equipment supplier, private company.

GN is the first solids control company focus on domestic high end market and overseas market. With over 70% product exporting to overseas drilling companies and oil service companies.

GN is the first solids control company has USA facility, Russia facility, to support the market development of Western countries oil drilling business

2) What is key product of GN Solids Control?

a. General solids control product, eg. Shale shaker, shaker screen, mud cleaner, desander, desilter ,centrifuge, centrifugal pump, mud agitator, mud gun, mud tank

b. complete line of mud system, from 500gpm mud system, 1000gpm mud system, 1500gpm mud system, 2000gpm mud system.

c. drilling waste management equipment, eg. Vertical cuttings dryer, screw conveyor, High G drying shaker, dewatering unit, flocculent unit, solidification unit, fixation unit, thermal desorption unit etc.

d. replacement shaker screen for market popular shale shakers.

3) Good after sales service win good reputation and repeat orders

GN Solids Control has a service team with many years jobsite experience. We can arrange engineer to give installation instruction service and test run instruction service once requested by clients. And the service cost is also much reasonable compared with USA solids control equipment service cost. What’s more, many USA solids control company don’t offer instruction service, they only sell equipment. Our good service ensure the correct operation of the equipment, win good reputation for GN in different countries of the world.

GN 500GPM Mud System used in Middle Eastern for Water Injection Effectively Drilling

Many customers through Middle East coming to GN asking for the drilling mud system used in water well going. Some of these are used for civil normal water wells, while some of them are utilized in oilfield water injection effectively drilling. For some oil water wells with large content regarding natural gas in oil coating or at the later time period of extraction, the oil member of staff always inject water into your oil well to keep a comfortable pressure of the oil level to ensure the oil production pace.
One of GN’s customers through Middle East sent back the photos of GN’s 500GPM mud system on their site. Many people just finished the ordering of this unit and great remarks were given to GN. Different from the mud cleaning system for oil drilling, this particular water well mud system is designed compact structure in order that it could be put on a trailer home for easy moving \.

Below specifications of this h2o injection well drilling mud system
1 . GN 3-Panel screens shale shaker to get first stage solids spliting up, with screen area of installment payments on your 6 square meters, is employed to remove the coarse drillingcuttings.
2 . De-sander, de-silter and under located machine drying shaker composited 3-in-1 mud cleaner unit for orange sand and silt separation. Cyclone unit are full PU material, the quantities regarding 10 inch de-sander along with 4 inch de-silter cyclone are respectively 1 in addition to 8.
3. Three model centrifugal pumps are equipped with 50HP electric motors. 2 are used to transfer drilling mud to cyclone unit, even though the third one is for mud mixing hopper. To highly recommend same model pump will make it easier for potential customer’s maintenance.
4. This specific unit also has independent tank compartment for mud mixing and storage.
5. Entire power requested to run this particular 500GPM drilling mud system will be 126KW, the user could adjustable rate mortgage the engine accordingly while below pictures showing. Purchaser locally got the serp and put it on the trailer home as the power source of often the mud system.
In addition to waters injection well drilling, this manner compact mud system could also be used in HDD (Horizontal Online Drilling). For this type going, the driller need shift the used drilling mud to the mud cleaning system. Similar to the picture showing, the shale shaker is connected with any submersible slurry pump that'll be installed in mud ditch to do this job.

Water Well Drilling Mud System for Middle East.

Water Well Drilling Mud System for Middle East.

Many customers from middle East come to GN inquiring for the dust gadget used in water well drilling. a number of these are used for civil water wells, while a number of units are used in oilfield water injection properly drilling. For some oil wells with massive content material of herbal gasoline in oil layer or on the later duration of extraction, the oil employee continually inject water into the oil nicely to keep a solid pressure of the oil layer to make certain a excessive oil manufacturing rate. 

certainly one of GN’s clients from center East sent again the pics of GN’s 500GPM mud machine on their web page. They just completed the commissioning of this unit and top remarks have been given to GN. special from the dust gadget for oil drilling, this water well dust device is designed compact structure in order that it is able to be placed on a trailer for smooth moving from one site to any other.

Under specifications of this water injection well drilling dust device

1. GN three-Panel displays shale shaker for first degree solids separation, with screen location of 2.6 square meters, is used to remove the coarse drilling cuttings.

2. De-sander, de-silter and below placed drying shaker composited 3-in-1 mud cleaner unit for sand and silt separation. Cyclone unit are full PU cloth, the quantities for 10 inch de-sander and four inch de-silter cyclone are respectively 1 and 8. 

3. three unit decanter centrifugal pumps are prepared with 50HP electric powered motors. 2 of them are used to switch drilling mud system  to cyclone unit, while the third one is for dust mixing hopper. To advocate same model pump could make it less difficult for destiny client’s renovation.

4. This unit also has unbiased tank compartment for dust mixing and storage. 

5. overall electricity requested to run this 500GPM dust device is 126KW, the user may want to equip the engine for that reason as below photographs showing. consumer regionally got the engine and put it on the trailer as the electricity source of the dust system.

Further to water injection well drilling, this type compact mud gadget also can be utilized in HDD (Horizontal Directional Drilling). For this type drilling, the driller want switch the used drilling mud to the dust gadget. just like the picture displaying, the shale shaker is connected with a submersible slurry pump with a view to be mounted in dust pit to do that process.

—————————