gnsolidsamerica: solidification unit

显示标签为“solidification unit”的博文。显示所有博文

2016年4月13日星期三

GN Solids Control equipment for drilling company

GN Solids Control is leading manufacturer and supplier for solids control equipment and drilling waste management equipment. As the down market and lower oil price push some Big drilling company to consider about China product to save production cost, and GN will be your best choice in China to supply solids control equipment. Recently, we have lots of drilling company and international oil service company to visit GN facility for the MOU of supply solids control equipment.

1) Why choose GN ?

GN is the 1^st API certified China solids control equipment supplier, private company.

GN is the first solids control company focus on domestic high end market and overseas market. With over 70% product exporting to overseas drilling companies and oil service companies.

GN is the first solids control company has USA facility, Russia facility, to support the market development of Western countries oil drilling business

2) What is key product of GN Solids Control?

a. General solids control product, eg. Shale shaker, shaker screen, mud cleaner, desander, desilter ,centrifuge, centrifugal pump, mud agitator, mud gun, mud tank

b. complete line of mud system, from 500gpm mud system, 1000gpm mud system, 1500gpm mud system, 2000gpm mud system.

c. drilling waste management equipment, eg. Vertical cuttings dryer, screw conveyor, High G drying shaker, dewatering unit, flocculent unit, solidification unit, fixation unit, thermal desorption unit etc.

d. replacement shaker screen for market popular shale shakers.

3) Good after sales service win good reputation and repeat orders

GN Solids Control has a service team with many years jobsite experience. We can arrange engineer to give installation instruction service and test run instruction service once requested by clients. And the service cost is also much reasonable compared with USA solids control equipment service cost. What’s more, many USA solids control company don’t offer instruction service, they only sell equipment. Our good service ensure the correct operation of the equipment, win good reputation for GN in different countries of the world.

2015年12月9日星期三

GN Drill Cuttings Solidification Unit to Africa

Increase your environmental friendly drilling efficiency with GN Solids Control products, one of the most important equipment is the Solidification / Stabilisation unit. The drill cuttings solidification unit is advanced and unique, which is quite flexible comparing the waste cuttings solidification plants.

Solidi cation – Is an absorption process where contaminants, typically oils, are taken into the absorbent material in the same way a sponge takes on water. In general, solidi cation is the addition of absorbents such as soil, y ash, kiln dust, cement, clays or sawdust to the drilling waste management . The solidi ed product will have improved properties such as strength, compressibility and a reduced permeability.

Stabilisation – Is an adsorption process whereby contaminents are electrochemically bonded to the stabilising agents. Contaminants that are stabilised within the matrix are less likely to be released into the environment. This process is particularly relevant to the stabilisation of heavy metals and oils that would otherwise be rapidly available to the environment through leaching.

The adeptness to coalesce or stabilise a accurate decay beck and the e ectiveness of the analysis is abased on the decay blazon and analysis reagent factors. Typically, adumbrative samples of the decay are class activated to actuate the a lot of acceptable conception above-mentioned to eld implementation. Selection of the conception is commonly based on key belief such as leachate superior and backbone of the nal product.

Image result for GN Dewatering unit and Cuttings solidification unit for drilling waste management

Solidi cation and stabilisation generally requires the use of specialised accessories and actinic reagents. The processes absorb signi deceit abstracts administration upstream and after of the bond unit. Some decay streams may accommodate contaminants that can arrest the solidi cation/stabilisation processes.

For the solidication / stabilisation action to yield abode it is important to carefully adviser the decay produced at the rigsite for levels of alkali baptize and oil. This will advice to minimise the use of reagents and optimise the process, thereby abbreviation costs and the ecology impact.

Thus, it is with the accomplishment and ability that Scomi Oiltools has developed over the endure 20 years that allows us to, accommodate safe, amount e ective and environmentally complete solidi cation and stabilisation processes.

2015年11月10日星期二

What is "IECEX/A-TEX" mark on GN Solids America’s solids control machines?

Oil rig drilling is world-wide operation and solids control machinery and system is manufacture t that it can be operate on any corner of the world, land and sea alike. As been one of the most hazard working- area condition, the electronic parts of machinery often marked "IECEX/A-TEX". This is the certificate marked as Hazardous Area Certifications. The mainstream mark is IECEX which is international which every country accept the standard while ATEX is European standard but most countries are accept the standard as well.

Explosive atmospheres can be caused by possible burning gases, mists, vapors or by combustible dusts, in combination with oxygen. With a certain concentration density all that is needed to cause an explosion is a source of fire cause by heat and spark.

ATEX or IECEX certified machinery will secure the operators and its machinery assets that under no matter in any working condition it will not cause an ignition so in conclusion it is safe, end of discussion. The standard divided into different zones that ID potential hazardous atmosphere in the area.

ATEX based on the requirements of two European Directives:

1. Directive 99/92/EC (also known as ‘ATEX 137’ or the ‘ATEX Workplace Directive’) is minimum requirements for improving the health and safety protection of workers potentially at risk from explosive atmospheres.

2. Directive 94/9/EC (also known as ‘ATEX 95’ or ‘the ATEX Equipment Directive’) on the approximation of the laws of Members States concerning equipment and protective systems intended for use in potentially explosive atmospheres.

What IECEX Scheme is an international Conformity Assessment Scheme covering Electrical Equipment for Explosive Atmospheres, as the internationally accepted means of demonstrating conformity with IEC Standards prepared by IEC TC31.

ATEX standard is about enabling to trade in European countries. Its purpose is to establish a level of safety which is to be regarded it is sufficient to ensure European authorities would accept the equipment certified.

Difference compare with ATEX, the IECEX is about giving confidence that a product or service meets clearly defined transparent criteria. By providing its transparency with a high level of confidence, it is intended that it will eventually provide a worldwide recognized and acceptance certificate in which the whole world has confidence. The driving force is safety, with the trade benefits following from the confidence.

GN Solids Control China factory introduced many advanced processing machines from developed countries like European,and USA.And our factory processing team are very experienced. So our production is very effiecient.We can manufacture a whole solids control system needed equipments in a short time. Welcome you contact GN group freely for solution

The ways Solidification/Stabilization works

The treatment of solidification/stabilization "s/s" is the treatment of environmentally-harmful; wastes for disposal, reuse and/or site storage of land on contaminated. It is the S/S treatment involves harmful materials mixing a binding reagent into the contaminated materials or waste. Although the terms solidification and stabilization sounds close-meaning by hearing, they describe different effects that the binding reagents create to immobilize hazardous constituents. Solidification refers to making a change in the physical properties of a waste. The result- desired changes usually include an increase of the compressive strength, a decrease of permeability, and encapsulation of hazardous constituents.

Stabilization at the other end, refers to chemical changes of the hazardous constituents in a waste. The desired-goal changes include converting the constituents into a less soluble, mobile, or toxic form by adding additional materials. S/S treatment involves mixing a jointed reagent into the contaminated media or waste. Binding reagents commonly used include cement, cement kiln dust (CKD), lime, lime kiln dust (LKD), limestone, fly ash, slag, gypsum and phosphate mixtures, and a various-kind number of proprietary reagents. Due to the great variation of waste constituents and media, a mixing material, design should be conducted on each type of waste. Most mix designs are a blend of the inorganic binding reagents listed above. Organic-blending have also been tried as well. These include asphalt, thermoplastic, and urea- formaldehyde. Organic binding reagents are rarely used in commercial scale due to their high cost compared to inorganic binders.

S/S is an effective treatment wide variety of organic and inorganic contaminants present in contaminated soil, sludge and sediment. The ability to effectively treat a wide variety of contaminants within the same media is a key reason why S/S is so frequently used in the remediation. Adding to the versatility of S/S treatment is the fact that contaminated material can be treated in-situ (in place) or ex-situ as already segregated waste or excavated material.
Related Arciels: